Posts for tag: dental implants

BoneGumsandImplants-KeepingaHealthyBalanceforaBeautifulSmile

Restoring a smile with implants involves more than the surgical procedure itself. We must also take into consideration the quality of the bone they’re placed into and the gums that will surround them — the “canvas” that showcases your new beautiful smile.

Bone — not only at the missing tooth site but supporting neighboring teeth as well — is the foundation for a successful implant. Without an adequate amount of bone, we can’t place an implant to achieve a final life-like appearance. Inadequate bone can be a problem if the tooth has been missing for awhile — without the stimulation of biting forces from the tooth, the bone can shrink gradually over time. Periodontal (gum) disease and other dental conditions can also cause bone loss.

The health of your gums — as well as the tissue type you’ve inherited from your parents, thin or thick — can also determine how natural the implant crown looks as it emerges from them. If they’ve receded due to gum disease they may not regenerate sufficiently, making your teeth longer-looking or leaving the triangular bit of gum tissue between the teeth, the papillae, noticeably missing. If you’ve inherited thin tissue gums, you’re also more susceptible to gum recession and there’s less margin for error during implant surgery.

There are some things we can do to minimize these problems. Tooth removal to make room for the new implant needs to be done carefully with as little tissue trauma as possible; it’s also helpful to place grafting material in the empty socket immediately after extraction, especially if there’s going to be a time gap before implant placement. If bone loss has already occurred, we can also use similar grafting techniques to rebuild the bone.

Likewise we need to take special care during implant surgery when dealing with thin or diseased gums. With the latter, it’s usually necessary to bring the gum disease under control and allow the gums to heal first. In extreme cases, cosmetic gum surgery may also help restore lost tissues and create a more natural look between the gums and the implant crown.

Creating a natural appearance with implants is a blend of technical skill and artistic insight. Keeping the balance between all these factors will produce a smile you’ll be proud to show.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Matching Teeth & Implants.”

DentalImplantscanReplaceYourWholeToothNotJustWhatYouSee

If you've lost a tooth or need to have one extracted, you have to decide how to replace it. Of all the options available none can match both the lifelikeness and function of a dental implant.

A dental implant is a prosthetic (false) tooth that mimics the root of a natural tooth. Once that implant root form fuses to the surrounding bone, we attach the crown, which is the part of the tooth you can see.

While other replacement options like bridges or dentures can restore the lifelikeness of the tooth crown, they don't replace the root. An implant's titanium post can: using a minor surgical procedure we imbed the post into the bone. Because bone cells have a natural affinity with titanium, they will grow around and adhere to the post over a few weeks after surgery. This further adds strength to the implant's hold in the bone.

Although the attachment isn't exactly like natural teeth, it can maintain this hold for many years. And because it encourages bone growth, a dental implant will help minimize bone loss, a natural consequence of losing teeth. Other replacement options can't do that.

Of course, implants are more costly than other restorations. With an attached crown, an implant can replace any number of teeth. But if you have extensive tooth loss, bridges or dentures would be more cost-effective selections.

But even then, implants could still play a role. We can strategically place a small number of implants as supports for a bridge or even a removable denture. Not only will the implants better secure their attachment, they'll also stimulate bone growth.

Is a dental implant the right choice for you? Visit us for a complete examination and evaluation. Afterward we can discuss your options and whether this phenomenal tooth restoration method could help restore your smile.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants: Your Best Option for Replacing Teeth.”

By Newmarket Dentistry
January 29, 2019
Category: Dental Procedures
Tags: dental implants  
GettingDentalImplantsRequiresMinorSurgery

Dental implants are best known as restorations for single missing teeth. But there’s more to them than that—they can also be used to support and secure removable dentures or fixed bridges.

That’s because a dental implant is actually a root replacement. A threaded titanium post is inserted directly into the jawbone where, over time, bone cells grow and adhere to it. This accumulated bone growth gives the implant its signature durability and contributes to its long-term success rate (95%-plus after ten years). It can support a single attached crown, or serve as an attachment point for a dental bridge or a connector for a removable denture.

The method and design of implants differentiates it from other restoration options. And there’s one other difference—implants require a minor surgical procedure to insert them into the jawbone.

While this might give you pause, implant surgery is no more complicated than a surgical tooth extraction. In most cases we can perform the procedure using local anesthesia (you’ll be awake the entire time) coupled with sedatives (if you have bouts of anxiety) to help you relax.

We first access the bone through small incisions in the gums and then create a small channel or hole in it. A surgical guide that fits over the teeth may be used to help pinpoint the exact location for the implant.

We then use a drilling sequence to progressively increase the size of the channel until it matches the implant size and shape. We’re then ready to insert the implant, which we remove at this time from its sterile packaging. We may then take a few x-rays to ensure the implant is in the right position, followed by closing the gums with sutures.

There may be a little discomfort for that day, but most patients can manage it with over-the-counter pain relievers like aspirin or ibuprofen. It’s what goes on over the next few weeks that’s of prime importance as the bone grows and adheres to the implant. Once they’re fully integrated, we’re ready to move to the next step of affixing your crown, bridge or denture to gain what you’ve waited so long for—your new implant-supported smile.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implant Surgery: What to Expect Before, During and After.”

By Newmarket Dentistry
January 19, 2019
Category: Dental Procedures
Tags: dental implants  
DentalImplantsBetterthanEverthankstoOngoingTechAdvances

While many people still consider dental implants the "new kids on the block" in dental restoration, they're now in their fourth decade of use. And since their inception implant technology has continued to improve and revolutionize how we replace missing teeth.

Implants are a different "species" compared to other restoration methods. To be precise, an implant is a tooth root replacement—usually a titanium metal post imbedded directly into the jaw bone. Titanium is not only a biocompatible metal, but bone cells naturally grow on its surface to create a strong and durable hold. It's this secure hold that's most responsible for implants' high long-term success rate.

But we should also credit some of this success to the steady stream of advances over the years in implant construction and supporting technologies. For one thing, we're now more accurate and precise with implant placement thanks to advances in computer tomography (CT) and cone beam CT (CBCT) scanning.

These digital processes merge a series of images taken by a special camera to form a three-dimensional model of the jaw. We can manipulate this model on a computer monitor to view it from different vantage points. It can help us locate and avoid anatomical structures like nerves and sinuses when determining where to place a future implant. CT and CBCT are especially useful when there's a concern about adequate available bone, a necessity for stable implants.

Technology has also improved how we create surgical guides, often used during implant surgery to obtain the most accurate results. Surgical guides are custom-made devices that fit over the teeth with the drilling locations for the implants marked on them. Recent advances in 3-D printing have made these guides even more accurate so that they fit more securely in the mouth. This greater stability increases their accuracy during the drilling sequence during surgery.

These and other advances are helping ensure every implant is a success story. The end result is both a functional restoration and a beautiful smile.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Technology Aids Dental Implant Therapy.”

By Newmarket Dentistry
December 10, 2018
Category: Dental Procedures
Tags: dental implants   bone graft  
BoneGraftingMightbeNecessaryBeforeYouObtainanImplant

Every year dentists place over 5 million dental implants for lost teeth, often removing the problem tooth and installing the implant at the same time. But getting a “tooth in a day” depends on a number of health factors, especially whether or not there’s adequate bone available for the implant. Otherwise, the implant’s placement accuracy and success could be compromised.

Bone loss can be a similar problem when a tooth has been missing for a long period of time. If this describes your situation, you may have already lost substantial bone in your jaw. To understand why, we need to know a little about bone’s growth cycle.

When bone cells reach the end of their useful life, they’re absorbed into the body by a process called resorption.  New cells then form to take the older cells’ place in a continuous cycle that keeps the bone healthy and strong. Forces generated when we chew travel through the teeth to the bone and help stimulate this growth. But when a tooth is missing, the bone doesn’t receive this stimulus. As a result, the bone may not replace itself at a healthy rate and diminish over time.

In extreme cases, we may need to consider some other dental restoration other than an implant. But if the bone loss isn’t too severe, we may be able to help increase it through bone grafting. We insert safe bone grafting material prepared in a lab directly into the jaw through a minor surgical procedure. The graft then acts like a scaffold for bone cells to form and grow upon. In a few months enough new bone may have formed to support an implant.

Bone grafting can also be used if you’re having a tooth removed to preserve the bone even if you’re not yet ready to obtain an implant. By placing a bone graft immediately after extraction, it’s possible to retain the bone for up to ten years—enough time to decide on your options for permanent restoration.

Whatever your situation, it’s important that you visit us as soon as possible for a complete examination. Afterward we can assess your options and hopefully come up with a treatment strategy that will eventually include smile-transforming dental implants.

If you would like more information on obtaining dental implants, please contact us or schedule an appointment for a consultation.