Posts for tag: x-rays
X-rays are such a routine part of dental care that it's easy to overlook how much this technology has revolutionized detecting and treating tooth decay. It's safe to say x-rays have helped save hundreds of millions of teeth over the last hundred years.
Thanks to its unique properties these invisible electro-magnetic waves give us precise images of the interior structure of teeth and gums. It's so precise that we can clearly detect even a small spot of softened, decayed tooth structure on an exposed x-ray film, often before it becomes visible to the naked eye. As a result, we can begin treating the decay earlier, minimizing the damage and increasing the chances for preserving the tooth.
There are a variety of ways we can utilize x-ray technology in diagnosing dental problems. The one, though, that's used the most is called the bitewing. The name comes from wing-like tabs extending out from a thin frame holding a segment of unexposed film. A technician places the frame inside the patient's mouth with the film on the tongue side of the teeth, and has them bite down on the tabs to hold the frame still. They then aim a camera at the patient's outer cheek, which then emits a very short burst of x-ray energy to expose the film.
Bitewings are popular because they give a full view of the back and side teeth, where decay is often hard to detect, with very little radiation exposure to the patient. And as x-ray technology has progressed over the years with digital processing and more efficient equipment, we can acquire sharper images with even less exposure. We've also developed standard protocols for when and how often we perform x-rays, so that we're getting the most diagnostic benefit for the least amount of exposure time.
Those few minutes getting an x-ray may seem routine, but the benefits to your dental health are truly amazing. The bitewing and other forms of x-rays play a huge role in helping us keep your teeth as healthy as they possibly can.
If you would like more information on x-ray diagnostics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Bitewing X-Rays.”
X-rays are an important diagnostic tool in dentistry because of their ability to penetrate and pass through body tissues. Because they penetrate at different speeds depending on tissue density (shorter and thus darker on exposed film for soft tissues, longer and lighter for hard tissues like bone or teeth), we’re able to detect decay which appear as dark areas on x-ray film.
Without x-rays, the early detection and diagnosis of dental problems would be quite difficult. But despite its obvious benefits, it’s still a form of released energy that exposes patients to a certain amount of radiation. Since the potential health risk from radiation depends on the amount released (the dosage) and for how long and often a person is exposed, we must determine if the dosage and frequency from dental x-rays is a cause for concern.
It’s a common misconception to view any radiation exposure as dangerous. The truth is, however, we’re all exposed daily to radiation from the natural environment — about 2 to 4.5 millisieverts (the dosage measurement for radiation exposure) a year, or about 10 microsieverts (one-thousandth of a millisievert) every day.
In comparison, radiation exposure from routine dental x-rays is a fraction of this if measured over time. A set of four bitewing images of the back teeth produces 4 microsieverts of radiation, less than half the average daily exposure. One of the most comprehensive x-ray sets, a full mouth series of 18-20 images using “D” speed film, results in an exposure of 85 microsieverts, equaling about a week of normal radiation exposure.
These thoroughly researched rates help demonstrate that regular dental x-rays are relatively safe. What’s more, x-ray technology has continued to advance since first used in the mid-20th Century. With innovations in film and digital processing, today’s equipment produces only 80% of the radiation exposure of earlier machines. In effect, we’ve increased our capabilities to more accurately detect and diagnose issues through x-rays, while lowering the amount of radiation exposure.
Of course, a person’s annual exposure rate may differ from others. If you have concerns for yourself or your family about x-ray radiation exposure, please feel free to discuss this with us. Our primary goal is to improve your oral health without undue risk to your health in general.
If you would like more information on x-ray diagnostics and safety, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Frequency and Safety.”
For decades, dental x-rays have helped us accurately diagnose and treat a wide array of dental diseases and conditions. But even with recent advances in digital imaging, the traditional x-ray does have one drawback: its two-dimensional view doesn’t always provide the “big picture” that a three-dimensional viewpoint can provide.
But a new type of x-ray technology can do just that: known as cone beam computed tomography (CBCT), these machines record hundreds of digital images as a cone-shaped beam of x-ray energy is projected through a device that rotates around a person’s head. A computer then assembles the images into a single three-dimensional image that can be manipulated on screen to view from various angles. Not only does this provide greater context and detail, it does so with no more radiation exposure than a standard 20-film digital full-mouth x-ray series.
While CBCT hasn’t replaced the traditional x-ray, it’s making its mark in a number of specialized areas of dentistry. The following are just a few of the ways CBCT is improving both accuracy and treatment outcomes.
Orthodontics. CBCT can provide a much more detailed view of the entire jaw; this can help us determine the best locations for realigning teeth safely and effectively.
Dental Implants. With a CBCT scan we can precisely locate nerve canals, sinuses and adjacent teeth before implant surgery to locate the best position for the implant.
TMD Treatment. To help develop the best treatment approach for alleviating the pain and dysfunction of temporo-mandibular joint disease (TMD), a CBCT scan can provide us detailed information on how the disease is affecting a patient’s joints, teeth, sinuses and airway.
Impactions. An impacted tooth can exert damaging pressure against the roots of neighboring teeth. A CBCT scan allows us to observe the impacted tooth from various vantage points to determine the best treatment approach for neighboring teeth, nerve canals and sinuses.
If you would like more information on CBCT technology, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Getting the Full Picture With Cone Beam Dental Scans.”
Your dental care would be much more limited without our ability to see “below the surface” with x-ray imaging. But since x-rays passing through the body are a form of radiation, could your exposure from them be hazardous to your health?
It depends on exposure dosages and, of course, the amount you have been exposed to over your lifetime. But, decades of research have demonstrated that exposure to dental x-rays during your regular office visits are only a fraction of the radiation you normally encounter from the natural environment every year.
X-rays have the ability to pass through body tissues, but at different rates for soft tissue like skin and muscle and hard tissue like bone. This effect creates shadows on exposed film; the differentiation is in such detail that a trained technician can interpret not only internal structures, but defects such as fractured bone or, in the case of dentistry, signs of tooth decay and bone loss from gum disease.
But like other energy sources in our environment, x-rays do emit radiation that in high doses can be dangerous to living tissue. The amount of exposure is measured in millisieverts (mSv), a unit that allows for comparison of doses from different sources of radiation. Scientists have calculated that we’re normally exposed to between 2 and 4.5 mSv every year.
By contrast, a single digital periapical image taken of a tooth is equal to 1 microsievert (μSv), or one thousandth of an mSv; a full mouth series (between 18 and 20 images) creates an exposure of 85 μSv, or 85/1000 of one mSv. In addition, advances in technology have further reduced the radiation exposure from x-ray imaging. For example, digital imaging has reduced exposure during full mouth x-rays from seven to ten days of equal exposure from normal background radiation to half a day, and with no loss in image quality.
In effect, dental x-rays pose little to no risk for patients. Still, understanding that x-ray imaging does expose patients to radiation, dentists follow certain protocols and safety precautions. For example, dentists will place a lead apron around their patients’ chest area during an x-ray exposure.
As your dentist, we’re happy to address any concerns you may have about x-ray radiation exposure. But rest assured, the x-ray devices used in your dental care, so necessary in the fight against tooth decay and other diseases, are safe and reliable.
If you would like more information on the use of x-ray technology and safety, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Frequency and Safety.”